Firefox LiPo Battery 11.1V 1600mAh 12C
Firefox LiPo battery.
Voltage: 11.1V
Capacity: 1600mAh
Dimension: 10.4 x 3.4 x 1.5 cm
Plug: mini tamya
Firefox LiPo Battery 11.1V 2300mAh 20C
Firefox LiPo Battery
Voltage: 11.1V
Capacity: 2300 mAh
Dimension: 10.3 x 2.2 x 3.4 cm
Firefox Superpower 1100mAh Li-polymer 11.1V
Firefox LiPo Battery.
Voltage: 11.1V
Capacity: 1100 mAh
Size : 100(L) X21(W)X18(H)mm
Firefox Superpower 1200 mAh Li-polymer 11.1v 20C
Firefox Superpower LiPo Battery
Voltage: 11.1V
Capacity: 1200 mAh
Size: 16.5cm x 1.2 cm x 1.2cm
Heated bed glass (borosilicate)
This glass is perfect for print with PCB heated bed.
Dimension: 200x200x3 mm Read the rest of this entry »
Heated bed PCB
This PCB is perfect for 3D printer, providing an heated surface for printing. Read the rest of this entry »
NEMA17 stepper motor
High torque Nema 17 stepper motor. Perfect for RepRap and any other DIY small application. Read the rest of this entry »
Pololu A4988 Stepper driver
The Pololu stepper driver is the most used in RepRap electronics, like Sanginololu or RAMPS. It’s already assembled so no soldering are required.
Prusa alluminium bed
Prusa alluminium bed (bottom and print plates). Bottom plate is made of pure alluminium (cheaper) and print plate is made of Anticorodal alluminium (better stiffness and surface finish).
Prusa motor kit
Set of five high torque Nema 17 stepper motor. Perfect for RepRap Prusa. Read the rest of this entry »
Prusa smooth rod kit
A kit of tempered and grinded steel bars. The bars are more expensive than others but specifically made for linear bearing sliding (more surface hardness and diameter precision). The perfect match for LM8UU bearings.
Prusa threaded rod kit BZP
All threaded rod needed for build a RepRap Prusa (like RepRap#Resco). The bars are Bright Zinc Plated: inox bar cost more and are not needed. Read the rest of this entry »
RepRap#Resco plastic Kit
The complete plastic kit to build a RepRap#Resco. Read the rest of this entry »
RescoHotEnd
RescoHotEnd is our all metal hotend (the part that you fix to the plastic extruder to extrude the filament).
Stripboard heated bed
Stripboard for prototipation. Short the different traces you obtain a cheap and effective bed heater (like shown here).
Thermistor 100k
Glass thermistor for high temperature. It can be used both for the extruder and for the bed.
- Resistance at 25°C: 100K
- Tolerance: 5%
- Manufacturer: EPCOS
- Model: B57550G104J
- Max temperature: 300°C
Wantai stepper motor
High torque Nema 17 stepper motor. Perfect for RepRap and any other DIY small application
Read the rest of this entry »
