Firefox LiPo battery.
Dimension: 10.4 x 3.4 x 1.5 cm
Plug: mini tamya
Firefox LiPo Battery
Capacity: 2300 mAh
Dimension: 10.3 x 2.2 x 3.4 cm
Firefox LiPo Battery.
Capacity: 1100 mAh
Size : 100(L) X21(W)X18(H)mm
Firefox Superpower LiPo Battery
Capacity: 1200 mAh
Size: 16.5cm x 1.2 cm x 1.2cm
Kapton tape for heated bed
High torque Nema 17 stepper motor. Perfect for RepRap and any other DIY small application. Read the rest of this entry »
The Pololu stepper driver is the most used in RepRap electronics, like Sanginololu or RAMPS. It’s already assembled so no soldering are required.
Prusa alluminium bed (bottom and print plates). Bottom plate is made of pure alluminium (cheaper) and print plate is made of Anticorodal alluminium (better stiffness and surface finish).
The kit contains two non-continuous T5 Timing belt for Prusa. The belts are steel reinforced. You can choose between 590 white PU and Kevlar 385 PU. Read the rest of this entry »
Set of five high torque Nema 17 stepper motor. Perfect for RepRap Prusa. Read the rest of this entry »
A kit of tempered and grinded steel bars. The bars are more expensive than others but specifically made for linear bearing sliding (more surface hardness and diameter precision). The perfect match for LM8UU bearings.
All threaded rod needed for build a RepRap Prusa (like RepRap#Resco). The bars are Bright Zinc Plated: inox bar cost more and are not needed. Read the rest of this entry »
The complete plastic kit to build a RepRap#Resco. Read the rest of this entry »
RescoHotEnd is our all metal hotend (the part that you fix to the plastic extruder to extrude the filament).
Stripboard for prototipation. Short the different traces you obtain a cheap and effective bed heater (like shown here).
Glass thermistor for high temperature. It can be used both for the extruder and for the bed.
- Resistance at 25°C: 100K
- Tolerance: 1%
- Manufacturer: EPCOS
- Max temperature: 300°C